Home Site Map Contact us

Materials Handling Yale Atlet Dambach Baumann Landoll Hanel Doors Industrial and Domestic Doors - Hörmann - Butzbach Commercial Wooden Doors - Algoma Docking Systems Stationary Dock Levellers Drawbridge Dock Levellers Mobile Combidock Mobile Loading Ramps Dock Shelters Architectural Hardware Complete Door Hardware - Hager Master Key System - Keso Euro Profile Locks - Cisa Electronic Locks Hotel & Resort Solutions Smart Electronic Lock Staff System Wave Electronic Lock Electronic Safes Wood Coatings

Industrial and Domestic Doors Hörmann - Industrial Sectional Doors - Garage doors - Operators - Dock Equipment - Rolling Shutters - Rolling Grills Butzbach Commercial Wooden Doors Rolling Grills When shutters are automated , a roll-up safety device and closing edge safety device prevent injuries to persons and damage to actual curtain. For underground garages and forklift truck traffic an optional through-traffic photocell is recommended. HG-A, standard aluminum A good solution if a shutter is only operated a few times each day, e.g. in shopping arcades. Grille and honeycomb connections as standard in bright-rolled aluminum. On request high-grade powder-coated in factory colour off-white (similar to RAL 9002), in colour shades to RAL or NCS or anodized to DIN 17611 in natural colour (E6/EV1). HG-V, reinforced aluminum For wider structural opening openings or a higher number of operations per day, such as in underground garages or multi-storey car parks. Bright-rolled aluminum grille with reinforced honeycomb connections in bright-rolled stainless steel V2A. Light-weigh yet offering high stability for wider openings (see table). HG-S, steel - robust and good value The inexpensive version for wider openings and a high number of cycles. The grille and honeycomb connections are in galvanized steel as standard. On request high-grade powder-coated in factory colour off-white (similar to RAL 9002) or in shade to RAL or NCS. HG-E, stainless steel for discerning tastes Grille and honeycomb connections in bright-rolled stainless steel V2A. Version that produces a particularly polished appearance. For more information, please visit: www.hoermann.com Thermal insulation Hormann industrial sectional doors acheive a high level of thermal insulation thanks to the PU foam-insulated steel sections and the aluminum extrusions with thermal breaks. Sound insulation The strong material composite comprising rigid foam sandwiched between steel reduces the noise level not only from the outside but also from the inside. Wind pressure Depending on the door type, reinforcements on wider ensure a high degree of stability Sealing The high-grade seals are flexible and weather-resistant. A frost-proof dual-chamber hollow profile seal along the bottom door edge affords protection dirt and rain. Together with the side seals with contrast strip, the lintel seal and intermediate seals between the individual door sections, reliable all-round sealing is ensured.